Showing posts with label cannot. Show all posts
Showing posts with label cannot. Show all posts

Monday, 19 October 2015

S III I9305 Works with Charged Battery, but Cannot be Charged...



Hi guys,

My S III seems to be working fine once the battery is charged. I have been using another S III to charge my battery (which is very annoying).

I thought it might be the USB port and am thinking of replacing it. However, there are also other symptoms which I have not been able to discover anywhere else on the internet yet.

First, when pressing the power button on the side, the phone does not boot like it used to, i need to hold the button for longer than usual and then the charging icon appears, before booting to the home screen.

Second, the battery icon in the top right corner always has an exclamation mark in it like it is critical, but the battery will last as normal.

So, all these three things are connected to the battery and charging, but how? Does anyone have any suggestions how to fix? Remember, I can not use the USB port so the phone does not connect to my PC. Thanks!



Cannot install any custom ROM



Hi,
I've got a SM-T531 tablet and I hate the official ROMs. They're bloated and ugly. I searched around and found 2 custom ROMs which I would love to try out. I have flashed ROMs on my previous devices but never had any issues. Here's what I have done:

First I have flashed CF-Autoroot using Odin and it was successful. I could install apps with root permission, it was all good.
Then I wanted to install a custom ROM. I followed the instructions in this link:
http://forum.xda-developers.com/tab-...p-3-1-t3084757

I downloaded the latest TWRP:
https://www.androidfilehost.com/?w=files&flid=40746

The ROM:
https://www.androidfilehost.com/?w=files&flid=40978

GApps (I downloaded the SOKP-Mini-Gapps.L5.1.1-R-1.0-20150801.zip file):
http://downloads.sonic-developers.com/gapps/

Then used ODIN to flash the TWRP file, it was successful. Next I used the "Home+Volume Up+Power" to go to the recovery mode. After that I cleaned (Factory Reset) and used the "Install ZIP" to flash the ROM and then GApps. All finished without any issues.

But when I reboot I get the following error (same colors):


Quote:









kernel is not seandroid enforcing
set warranty bit : kernel





It stops there and never goes to any boot screen. Just freezes.

It's the same with the ROM mentioned in the following link:
http://forum.xda-developers.com/tab-...a-0-7-t2963906

Note: When I flashed the stock firmware, the tablet boots perfectly fine. But when I try to install custom ROMs I get this.
I have never seen this error before. What am I doing wrong?

I would appreciate any kind of help. Thanks in advance.



Samsung Galaxy S6 cannot see a Wi-fi Network



Hi,

I am on holiday in the Costa del Sol and the hotel has free wi-fi.

My Windows 7 laptop and my daughter's Windows 10 laptop, and my HTC One M8 phone can all see the hotel wi-fi network listed after a network scan, and can all connect after entering the password. The signal is strong, 6 bars.

However, my daughter's new Samsung Galaxy S6 cannot see the hotel wif-fi network after a scan at all, but does see various other distant wi-fi networks.

We have tried rebooting the S6, but no joy.

If it helps, using my laptop, it tells me the following about the connection:

Security Type: WPA2-Personal
Encryption Type: AES

Anyone any idea why the S6 does not see this network, while all our other devices can see it no problem?

Rock



Sunday, 18 October 2015

Help! My tab is bricked, cannot be started. [New Thread]



Ok guys, long story short, here are the symptoms:

1) Still shows charging status.
2) Can enter download mode ONLY after being charged and the charging status is shown even for a short duration. Else, it will not react to any button I push.
3) Cannot enter recovery mode.
4) Somehow I can boot up to the SGT-2 logo which is rare. (I tried to start more than hundred times).
5) While in download mode, my PC wont discover the tab. In other PC, it simply says "device descriptor request failed". Which is code 43.


What I've tried:

1) Heimdall
2) Changing USB (3 times)
3) Different PC (2 times)
4) Removed the battery and put it back
5) Kies and drivers of all sorts I found on forums.
6) Swearing and threatening to kill the tab (numerous times)

I really need assistance. I maybe need to bring it to the service centre, however it will be very costing I presume. So does anyone have ever encountered the same problem as mine or know how to solve it? Please and thanks.



Zenfone 2 not booting to Android and cannot access Recovery.



Hey everyone,

I am one of the people who tried the office bootloader unlock and now I have a problem. My phone will not boot to android. I get the android with the exclamation mark that flashes. I can reboot and select recovery at the bootloader, but when I hit power and vol+ I get the recovery screen for about 4 seconds before it goes back to the android with exclamation mark. I can see the following last few lines repeat:
E: cant mount cache (invalid argument)
E: failed to mount /cache/recovery/locale

I tried to erase the cache in fastboot, but I get the error "FAILED (remote: can not mount the necessary partition)". I cannot access adb as I cannot get the recovery to pull up. I am pretty sure my bootloader is still locked. It is like my partitions have been messed up. I know that Asus is aware of the issue with the bootloader app, but any updates pushed in apk format or that require the recovery will not be of help to me.

Is there anyway to rebuild the partitions or reflash the firmware via fastboot with a locked bootloader? I am used to an old Nook Tablet that you can boot from an sd card to fix issues like this.